Remora 3 Global
Asset Tracking
A GLOBAL ASSET TRACKER
Remora 3 Global uses 4G Cat 1bis / 2G networks and has a long-life and ultra-rugged battery-powered GPS. It also boasts Bluetooth® gateway for global asset tracking and condition monitoring applications
Track Anywhere
- Cellular 4G Cat 1bis with 2G fallback enables seamless global asset tracking and management
2G Migration plan - Operates on current 2G networks with a migration path to 4G when/if 2G networks are shut down
Connect more with Bluetooth - Bluetooth Low Energy Gateway for tagged asset management and sensor monitoring
‘Deploy Once’ Battery Life - 10+ years on 2 x D LTC user- replaceable batteries with ‘Battery Low’ and ‘Battery Critical’ alerts
Second-by-Second Tracking - Supports aggressive and/or extended reporting requirements including highly accurate speed, run hour and odometer monitoring
- Adaptive Tracking
Tracks assets when they’re on the move and enters sleep mode when stationary to conserve energy - Ultra-Rugged
Compact and waterproof housing ensures the device can withstand impact, fine dust, and brief submersion - Tamper Detection
- Magnetic Tamper Detection
SPECIFICATIONS
Connectivity
- Cellular Module –Ublox LENA R8 Modem operates on all major global 4G Cat 1bis and 2G bands
Supported 4G Cat 1bis bands:
B1, B2, B3, B4, B5, B7, B8, B12, B20, B28, B38, B40, B41, B66 - Bluetooth® 5.2Gateway – Bluetooth 5.2 gateway reports nearby Bluetooth tags and sensors for affordable tagged asset management and sensor monitoring
- SIM Size & Access – Internal Nano 4FF SIM
Batteries
- User-Replaceable Batteries – 2 x D Cell (3.7V per cell)
- Supported Battery Types – LithiumThionyl Chloride (LTC)
- Battery Life –
Once Daily location updates – 10+ years
Movement-Based location updates – 10+ years
Hourly location updates – 10+ years
Second-by-second tracking – 2 years
Location
- GNSS: Module Ublox LENA-R8001M10
- Constellations: Concurrent GPS/QZSS, GLONASS, Galileo, BeiDou
- Tracking Sensitivity: -148 dBm cold start / -159 dBm hot start
- *Location Accuracy: ~1m CEP, GPS, -130 dBm
- GNSS Assistance: GNSS ephemeris data for greater sensitivity and position accuracy
- Low Noise Amplifier: GPS signals are filtered and boosted by a SAW filter and low-noise amplifier (LNA) allowing operation where other units fail
- Cell Tower Location: Cell tower location fallback for positioning with GPS can’t get a fix
*Position accuracy specifications are provided by the GNSS supplier and reflect ideal conditions. Device configuration, installation, environmen-tal conditions, augmentation services, and many other factors may lead to variations in positioning accuracy.
Power
- Input Voltage – 5-16V DC
- Sleep Current – <10uA
- Safety – Reverse Polarity Protection and Fuse Protection
*Average current in lowest power configuration
Mechanics / Design
- Dimensions – 224 x 91 x 41 mm (8.82 x 3.58 x 1.61”
- Weight – 234g
- Housing – Ultra-Rugged IP67 Housing. Non-branded housing for optional white-labelling
- IP Rating – IP67 rated housing ensures device can withstand fine dust, high-pressure spray, submersion for 30 mins in 1m of water, and extreme temperatures
- Installation – Compact and concealable. Multiple installation options for covertly and easily securing the device to assets with screws, bolts, cable ties, rivets, and more. Stainless steel screws provided
- Operating Temperature – -30°C to +60°C
- Cellular Antenna – Internal
- GPS Antenna – Internal
- 3-Axis Accelerometer – 3-Axis Accelerometer to detect movement, high G-force events, and more
- Diagnostic LED – Diagnostic LED indicates operation status
- Flash Memory – Store weeks of records if device is out of cellular coverage. Storage capacity for over 27 days of continuous 30-second logging
- On-Board Speed and Heading – Current speed and heading is reported with each position update
- On-Board Temperature – The device reports internal temperature which provides an indication of ambient temperature but may not always be precise
Smarts
- Adaptive Tracking – Configure parameters to send updates based on set time intervals or when movement occurs. Adaptive tracking technology detects when the device is on the move and increases the update rate, providing detail when you need it while conserving battery when stationary.
- Battery Life Monitoring – Battery Meter with “Battery Low” and “Battery Critical” alert levels
- Geofence Alerts – Geofences can be downloaded directly to the device for enhanced location-based actions and alerts. Maximum of 500 Geofences with up to 100 points per geofence.
- Impact Detection – Configure impact-detection alerts when G-forces are exceeded by a user-defined threshold
- Rotation Counting Run Hour Monitoring – Keeps a count of the number of rotations of the device about the Z axis
- Run Hour Monitoring – Capture run hours based on movement to understand and optimize asset utilization
- Sleep Mode – Stationary devices enter sleep mode until movement occurs to conserve battery life and optimize data usage
- Tamper Alerts Theft Recovery – Magnetic switch provides an alert if the device is removed from your asset
- Theft Recovery – Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval
- Tip Detection – Define a range of angles that constitutes a ‘tipped’ state and configure alerts
Device Management
- Flexible Configuration – Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application
- Device Management Platform – Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system
- Configuration App – Configurable with DMLink Provisioning tool
Integration
- Third-Party Integration -HTTPS Webhook
Security
- Data Security – Military-level AES-256 Encryption from device to Device Management Platform to protect the integrity and confidentiality of telematics data. Data forwarded to third- party systems is sent via HTTPS for end-to-end security.
Warranty
- Manufacturer’s Warranty – Two-year manufacturer’s warranty
Certifications
Please contact our support team for a full list of compliance specifications and documentation for your region
“In the civil & mining sector, efficiency and safety are our top priorities. Digicore has been a cornerstone of our operations, providing us with cutting-edge IVMS solutions. What impresses us the most is their ability to comprehend our unique challenges and design solutions that are both effective and cost-efficient. Their after-sales support is exceptional - always reachable, always proactive. It's a pleasure to partner with such a trustworthy, 100% Australian owned company.”
“We have worked with Digicore for over the last 10 years and at every stage they have come up with innovative and price effective ways in which to help our business. As we grew, our demands grew and Dan from Digicore continued to provide excellent service and the best products.”
“I want to say thank you for the phenomenal service and input Digicore has had, it has been particularly helpful in providing input to our business IVMS plans. Your team were incredibly professional and Digicore IVMS 2.0 is a very impressive solution.”
“We started with a large tracking company and got locked in before discovering their units didn't have the functions we required. We switched to Digicore and we couldn't be happier. The product is excellent, pricing is very competitive but more importantly their product knowledge and support is second to none.”